Doall C-4100NC Programmable Automatic horizontal band saw, rebuilt with Warranty

Description

For your consideration:
Doall Heavy Duty C-4100NC
programmable bandsaw, Made in the
USA
PRODUCT DESCRIPTION
Type: Horizontal Band Saws (Automatic)
Manufacturer: DOALL
Model: C-4100NC
Year: 2011
Stock #: 8338
Used - Rebuilt
Legendary Doall Quality, made in Minnesota USA, heavy duty through out, Made to run all
day long.
Programmable blade speeds, length, piece count, automatic kerf calculation for multiple
feeds, Chip conveyor ready to work hard.
Myers Technology Company Proprietary
50 Point Refurbishing and Repair Process
Myers Technology Company (MTC) carefully examines all major castings for cracks, wear, and
weak point failure.
MTC tests all slide and pivot areas for proper alignment and functionality.
We start up and test run all equipment.
MTC ensures that all functions of both manual and autocycles work properly.
We take note of any missing or failing parts and place orders for replacement parts that meet
or exceed OEM standards.
Once the machine passes inspection on steps 1-5, MTC begins disassembly.
All guards are removed and inspected for wear or cracks.
All way covers are removed and ways and covers inspected for wear or tear.
Machine oil is drained, cleaned and replaced with new oil to proper levels and condition.
All vices, chucks, and other mechanical control items are removed, cleaned and inspected.
The machine is thoroughly cleaned using steam, degreasers, and solvents.
Page 1/8
DATE: 9/1/23
PREPARED FOR:
John J. Myers CMTSE
Myers Technology Co.
2150 Touhy Ave.
Elk Grove Village, Illinois 60007
United States
[email protected]
847-290-0167 X 138
PREPARED BY:
John Myers
[email protected]
Myers Technology Co., LLC
2150 Touhy Avenue
Elk Grove Village, Illinois 60007
United States
myerstc.com
QUOTE SUMMARY:
DOALL C-4100NC
8338
,900.00 USD
QUOTE:
#12697
The hydraulic system is tested for noise.
The hydraulic system pressure is tested for proper settings.
The hydraulic system couplings are examined and aligned as needed.
The hydraulic system hoses are inspected and replaced as needed.
The hydraulic system valves are inspected and tested for proper function.
Electrical system wires are cleaned and examined for damage or wear, replaced as needed.
Electrical system switches are cleaned and inspected for damage or wear, replaced as
needed.
Electrical system controls are cleaned and inspected for damage or wear, replaced as needed.
The electrical system cabinet is examined and cleaned.
Worn and failing elements of the hydraulic and electrical systems are replaced as necessary.
Bearings are inspected for proper function and measured for play.
Bearings are replaced as necessary.
Motors are inspected and rebuilt or replaced as necessary.
Motor couplings are removed, cleaned, and examined for wear and failure, replaced as
necessary.
Belts are inspected for wear, cracks, and fraying and replaced as necessary.
Belts are inspected for proper alignment.
Gearboxes are cleaned and inspected.
Oil is drained from gearbox.
Gearboxes are refilled with proper oil to correct levels.
Chip conveyors are cleaned and inspected for wear.
Coolant systems are cleaned and inspected.
Worn and failing elements of the gearbox, conveyor, and coolant systems are inspected and
replaced as necessary.
Hydraulic fluid is drained and replaced to proper levels in hydraulic system.
All filters are removed and cleaned or replaced.
Sheet metal is cleaned and inspected for wear and failure.
Safety switches are cleaned and tested for proper function.
Safety switches are replaced as necessary.
Machine is inspected to ensure steps 1-38 have been properly completed.
Unit approved for painting.
All previously painted surfaces are prepped and primed.
All primed surfaces are given 2 coats of industrial grade paint.
All systems are reassembled to complete the machine.
All buttons and switches on control works are inspected for wear and functionality.
Machine functions are tested for performance.
Machine is operated in full automatic mode.
Test cuts are completed and examined for accuracy.
If unit passes tests in steps 44-47, machine is calibrated.
A video of the machine is recorded.
Machine is prepped for proper shipping, tied down, Wrapped, etc.
Machine is given a 6 month Warranty
EQUIPPED WITH
programmable control, Variable vise pressure, Chip conveyor, Carbide faced blade guides,
Flood coolant with wash down, Work light, programmable 10HP blade drive, Rebuilt to our
exacting process
SPECIFICATIONS
RECT-CAP (H) 16"
RECT-CAP (W) 14"
CONTROL CNC (Doall NC)
DIMENSIONS 8' x 8' x 6' high
WEIGHT Approx. 6,800 lbs.
Specification : Round Work Capacity 16" - Square Work Capacity 14" x 16" Page 2/8
DATE: 9/1/23
PREPARED FOR:
John J. Myers CMTSE
Myers Technology Co.
2150 Touhy Ave.
Elk Grove Village, Illinois 60007
United States
[email protected]
847-290-0167 X 138
PREPARED BY:
John Myers
[email protected]
Myers Technology Co., LLC
2150 Touhy Avenue
Elk Grove Village, Illinois 60007
United States
myerstc.com
QUOTE SUMMARY:
DOALL C-4100NC
8338
,500.00 USD
QUOTE:
#12697
Max Blade Size 1.5" x 186"
Blade Wheel Diameter 21"
Blade Speeds Variable 40 - 360 FPM
Stock Feed Shuttle Travel 24" Single Stroke / 999" Multiple Index Number of Shuttle Indexes
Drive Motor 10 HP
Coolant Capacity 20 Gallons
24" Stroking Stock Shuttle Vise Front Hydraulic Vise
Hydraulic Band Tensioning with Controls
12" Long Parts Drop Table
Chip Conveyor
Coolant System
Work Light
Electrics:460 Volt, 3 Phase
Approximate Machine Wt. 6800LBS